Cisco TelePresence Administrator's Manual page 400

Reference material
Login Remote Protocol: <LDAP>
The protocol used to connect to the external directory.
Default: LDAP
Example: xConfiguration Login Remote Protocol: LDAP
Login User Groups Group [1..15] Access: <None/ReadWrite>
Defines the access level for members of the specified user group.
None: no access allowed.
ReadWrite: configuration can be viewed and changed.
Default: ReadWrite
Example: xConfiguration Login User Groups Group 1 Access: ReadWrite
Login User Groups Group [1..15] Name: <S: 0,128>
Defines the name of a user group that determines which access rights members of the group have after they
have been successfully authenticated to use the VCS.
Example: xConfiguration Login User Groups Group 1 Name: "FindMeAccounts"
Login User Source: <Local/Remote>
Defines where user login credentials are authenticated before access is allowed to the VCS.
Remote: credentials are verified against an external credentials directory, for example Windows Active Directory.
Local: credentials are verified against a local database stored on the VCS.
Default: Local
Example: xConfiguration Login User Source: Local
NTP Address: <S: 0, 128>
Sets the IP address or Fully Qualified Domain Name (FQDN) of the NTP server to be used when synchronizing
system time.
Example: xConfiguration NTP Address: "ntp.server.example.com"
Option [1..64] Key: <S: 0, 90>
Specifies the option key of your software option. These are added to the VCS in order to add extra functionality,
such as increasing the VCS's capacity. Contact your TANDBERG representative for further information.
Example: xConfiguration Option 1 Key: "1X4757T5-1-60BAD5CD"
Policy AdministratorPolicy Mode: <Off/LocalCPL/LocalService/PolicyService>
Enables and disables use of Call Policy.
Off: Disables call policy.
LocalCPL: uses policy from an uploaded CPL file.
LocalService: uses group policy information and a local file.
PolicyService: uses an external policy server.
Default: Off
Example: xConfiguration Policy AdministratorPolicy Mode: Off
Cisco VCS Administrator Guide (X7.1) Page 400 of 479