Cisco TelePresence Administrator's Manual page 386

Reference material
Applications ConferenceFactory Mode: <On/Off>
The Mode option allows you to enable or disable the Conference Factory application.
Default: Off
Example: xConfiguration Applications ConferenceFactory Mode: Off
Applications ConferenceFactory Range End: <1..65535>
The last number of the range that replaces %% in the template used to generate a conference alias.
Default: 65535
Example: xConfiguration Applications ConferenceFactory Range End: 30000
Applications ConferenceFactory Range Start: <1..65535>
The first number of the range that replaces %% in the template used to generate a conference alias.
Default: 65535
Example: xConfiguration Applications ConferenceFactory Range Start: 10000
Applications ConferenceFactory Template: <S:0,60>
The alias that the VCS will tell the endpoint to dial in order to create a Multiway conference on the MCU. This
alias must route to the MCU as a fully-qualified SIP alias
Example: Applications ConferenceFactory Template: "563%%@example.com"
Applications External Status [1..10] Filename: <S:0,255>
XML file containing status that is to be attached for an external application.
Example: xConfiguration Applications External Status 1 Filename: "foo.xml"
Applications External Status [1..10] Name: <S:0,64>
Descriptive name for the external application whose status is being referenced.
Example: xConfiguration Applications External Status 1 Name: "foo"
Applications OCS Relay Mode: <On/Off>
Enables or disables OCS relay support.
Default: Off
Example: xConfiguration Applications OCS Relay Mode: Off
Applications OCS Relay OCS Domain: <S:0,128>
The SIP domain in use on the Microsoft Office Communications Server. This must be selected from one of the SIP
domains already configured on the VCS, and must be the same domain used by all FindMe names.
Example: xConfiguration Applications OCS Relay OCS Domain: "example.com"
Applications OCS Relay OCS Routing Prefix: <S:0,128>
Prefix applied to the SIP domain of requests destined for OCS. This prefix is used by the VCS search rules to
route the requests via the appropriate neighbor zone to the Microsoft Office Communications Server.
Default: ocs
Example: xConfiguration Applications OCS Relay OCS Routing Prefix: "ocs"
Applications Presence Server Mode: <On/Off>
Enables and disables the SIMPLE Presence Server. Note: SIP mode must also be enabled for the Presence
Server to function.
Default: Off
Example: xConfiguration Applications Presence Server Mode: On
Cisco VCS Administrator Guide (X7.1) Page 386 of 479