Cisco TelePresence Administrator's Manual page 388

Reference material
Authentication ADS DC [1..5] Address: <S: 0,39>
The address of a domain controller that can be used when the VCS joins the AD domain. Not specifying a
specific AD will result the use of DNS SRV queries to find an AD.
Example: xConfiguration Authentication ADS DC 1 Address: "192.168.0.0"
Authentication ADS Encryption: <Off/TLS>
Sets the encryption to use for the LDAP connection to the ADS server.
Off: no encryption is used.
TLS: TLS encryption is used.
Default: TLS
Example: xConfiguration Authentication ADS Encryption: TLS
Authentication ADS KDC [1..5] Address: <S: 0,39>
The address of a Kerberos Distribution Center (KDC) to be used when connected to the AD domain. Not
specifying a specific KDC will result in the use of DNS SRV queries to find a KDC.
Example: xConfiguration Authentication ADS KDC 1 Address: "192.168.0.0"
Authentication ADS KDC [1..5] Port: <1..65534>
Specifies the port of a KDC that can be used when the VCS joins the AD domain.
Default: 88
Example: xConfiguration Authentication ADS KDC 1 Port: 88
Authentication ADS Mode: <On/Off>
Indicates if the VCS should attempt to form a relationship with the AD.
Default: Off
Example: xConfiguration Authentication ADS Mode: On
Authentication ADS SPNEGO: <Enabled/Disabled>
Indicates if SPNEGO (Simple and Protected GSSAPI Negotiation Mechanism) is used when the client (the VCS)
authenticates with the server (the AD domain controller).
Default: Enabled
Example: xConfiguration Authentication ADS SPNEGO: Enabled
Authentication ADS SecureChannel: <Auto/Enabled/Disabled>
Indicates if data transmitted from the VCS to an AD domain controller is sent over a secure channel.
Default: Auto
Example: xConfiguration Authentication ADS SecureChannel: Auto
Authentication ADS Workgroup: <S: 0,15>
The workgroup used when the VCS joins the AD domain.
Example: xConfiguration Authentication ADS Workgroup: "corporation"
Authentication Database: <LocalDatabase/LDAPDatabase>
Selects between a local authentication database and a remote LDAP repository for the storage of password
information for authentication.
Default: LocalDatabase
Example: xConfiguration Authentication Database: LocalDatabase
Cisco VCS Administrator Guide (X7.1) Page 388 of 479