Cisco TelePresence Administrator's Manual page 419

Reference material
Zones LocalZone SubZones MembershipRules Rule [1..3000] Description: <S: 0,64>
A free-form description of the membership rule.
Example: xConfiguration Zones LocalZone SubZones MembershipRules Rule 1 Description:
"Office-based staff"
Zones LocalZone SubZones MembershipRules Rule [1..3000] Name: <S: 0,50>
Assigns a name to this membership rule.
Example: xConfiguration Zones LocalZone SubZones MembershipRules Rule 1 Name: "Office
Workers"
Zones LocalZone SubZones MembershipRules Rule [1..3000] Pattern String: <S: 0,60>
Specifies the pattern against which the alias is compared.
Example: xConfiguration Zones LocalZone SubZones MembershipRules Rule 1 Pattern String:
"@example.com"
Zones LocalZone SubZones MembershipRules Rule [1..3000] Pattern Type: <Exact/Prefix/Suffix/Regex>
The way in which the pattern must match the alias.
Example: xConfiguration Zones LocalZone SubZones MembershipRules Rule 1 Pattern Type:
Suffix
Zones LocalZone SubZones MembershipRules Rule [1..3000] Priority: <1..65534>
Determines the order in which the rules are applied (and thus to which subzone the endpoint is assigned) if an
endpoint's address satisfies multiple rules. The rules with the highest priority (1, then 2, then 3 and so on) are
applied first. If multiple Subnet rules have the same priority the rule with the largest prefix length is applied first.
Alias Pattern Match rules at the same priority are searched in configuration order.
Default: 100
Example: xConfiguration Zones LocalZone SubZones MembershipRules Rule 1 Priority: 100
Zones LocalZone SubZones MembershipRules Rule [1..3000] State: <Enabled/Disabled>
Indicates if the membership rule is enabled or disabled. Disabled membership rules are ignored.
Default: Enabled
Example: xConfiguration Zones LocalZone SubZones MembershipRules Rule 1 State: Enabled
Zones LocalZone SubZones MembershipRules Rule [1..3000] SubZoneName: <S: 0,50>
The subzone to which an endpoint is assigned if its address satisfies this rule.
Example: xConfiguration Zones LocalZone SubZones MembershipRules Rule 1 SubZoneName:
"Branch Office"
Zones LocalZone SubZones MembershipRules Rule [1..3000] Subnet Address: <S: 0,39>
Specifies an IP address used (in conjunction with the prefix length) to identify this subnet.
Example: xConfiguration Zones LocalZone SubZones MembershipRules Rule 1 Subnet Address:
"192.168.0.0"
Zones LocalZone SubZones MembershipRules Rule [1..3000] Subnet PrefixLength: <1..128>
The number of bits of the subnet address which must match for an IP address to belong in this subnet.
Default: 32
Example: xConfiguration Zones LocalZone SubZones MembershipRules Rule 1 Subnet
PrefixLength: 32
Cisco VCS Administrator Guide (X7.1) Page 419 of 479