Cisco TelePresence Administrator's Manual page 403

Reference material
Policy Services Service [1..5] Description: <S: 0,64>
A free-form description of the Policy Service.
Example: xConfiguration Policy Services Service 1 Description: "Conference management
service"
Policy Services Service [1..5] HTTPMethod: <POST/GET>
Specifies the HTTP method type to use for the remote service.
Default: POST
Example: xConfiguration Policy Services Service 1 HTTPMethod: POST
Policy Services Service [1..5] Name: <S: 0,50>
Assigns a name to this Policy Service.
Example: xConfiguration Policy Services Service 1 Name: "Conference handler"
Policy Services Service [1..5] Password: <S: 0,82>
Specifies the password used by the VCS to log in and query the remote service. The maximum plaintext length is
30 characters, which will then be encrypted.
Example: xConfiguration Policy Services Service 1 Password: "password123"
Policy Services Service [1..5] Path: <S: 0,255>
Specifies the URL of the remote service.
Example: xConfiguration Policy Services Service 1 Path: "service"
Policy Services Service [1..5] Protocol: <HTTP/HTTPS>
Specifies the protocol used to connect to the remote service.
Default: HTTPS
Example: xConfiguration Policy Services Service 1 Protocol: HTTPS
Policy Services Service [1..5] Server [1..3] Address: <S: 0,128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the remote service.
Example: xConfiguration Policy Services Service 1 Server 1 Address: "192.168.0.0"
Policy Services Service [1..5] Status Path: <S: 0..255>
Specifies the path for obtaining the remote service status.
Default: status
Example: xConfiguration Policy Services Service 1 Status Path: status
Policy Services Service [1..5] TLS CRLCheck Mode: <On/Off>
Controls certificate revocation list checking of the certificate supplied by the policy service. When enabled, the
server's X.509 certificate will be checked against the revocation list of the certificate authority of the certificate.
Default: Off
Example: xConfiguration Policy Services Service 1 TLS CRLCheck Mode: Off
Policy Services Service [1..5] TLS Verify Mode: <On/Off>
Controls X.509 certificate checking and mutual authentication between this VCS and the policy service. When
enabled, the server's FQDN or IP address, as specified in the address field, must be contained within the server's
X.509 certificate (in either the Subject Common Name or the Subject Alternative Name attributes).
Default: On
Example: xConfiguration Policy Services Service [1..5] TLS Verify Mode: On
Cisco VCS Administrator Guide (X7.1) Page 403 of 479