Starter Pack Provisioning; Configuring Starter Pack Provisioning - Cisco TelePresence Administrator's Manual

Starter Pack provisioning

The VCS's Starter Pack Provisioning Server provides basic device provisioning, including phone book
support, for a range of endpoint device types, including Movi users, without the need for TMS.
The Starter Pack option key must be installed to use basic device provisioning. It cannot be used in
combination with device provisioning managed through TMS. Note that the Starter Pack option key is
designed for single box deployments and is only available as a pre-configured factory setting.
Starter Pack
The Starter Pack is suitable for small enterprises. It provides basic VCS functionality and includes the
following features:
Expressway
n
FindMe
n
The following license restrictions apply by default:
50 registrations
n
5 calls (any combination of traversal and non-traversal calls); extra call license option keys can be added if
n
required (although, note that the Starter Pack has a maximum limit of 25 traversal calls)
900 TURN relays
n
When the Starter Pack option key is installed the Presence Server and FindMe are automatically enabled.

Configuring Starter Pack provisioning

The Provisioning page (Applications >
when the VCS is running in Starter Pack mode.
The Starter Pack Provisioning Server provides basic device provisioning and is automatically enabled when
the Starter Pack option key is installed.
You can monitor the Provisioning Server on the
Bandwidth limits
The Bandwidth limits section lists each supported device type and lets you choose whether or not to enable
the provisioning of bandwidth limits for that device.
If you enable the bandwidth limits option for a device type you can then configure the maximum incoming and
outgoing bandwidth (in kbps) values to set on the provisioned devices.
ClearPath
The ClearPath section lists each supported device type and lets you choose whether or not to enable the
provisioning of ClearPath for that device.
Provisioning users
To provision individual users, you must set up
Cisco VCS Administrator Guide (X7.1)
Provisioning) is used to configure the VCS's
Starter Pack status
user accounts.
Provisioning Server
page.
Applications
Page 256 of 479