Network Configuration Area - Cisco 7975G Software Manual

Remote Monitoring
Item
Message Waiting
UDI
Time
Time Zone
Date
LLDP: PC Port
LLDP-MED: SW Port

Network Configuration Area

The Network Configuration area on a phone web page displays network configuration information and
information about other phone settings. The following table describes this information.
You can view and set many of these items from the Network Configuration Menu and the Device Configuration
Menu on the Cisco Unified IP Phone. For more information, see
on page
To display the Network Configuration area, access the web page for the phone as described in the
Web Page for Phone, on page
Description
Indicator of a voice message on any line of this phone
Displays the following Cisco Unique Device Identifier (UDI) information about
the phone:
• Device Type: Indicates hardware type. For example, phone displays for
all phone models.
• Device Description: Displays the name of the phone that is associated with
the indicated model type.
• Product Identifier: Specifies the phone model.
• Version Identifier: Represents the hardware version of the phone.
The Version Identifier field might display blank if using an older model
Cisco Unified IP Phone because the hardware does not provide this
information.
• Serial Number: Displays the unique serial number of the phone.
Time obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs.
Time zone obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs.
Date obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs.
Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC
port.
Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery
(LLDP-MED) is enabled on the switch port.
123.
198, and then click the Network Configuration hyperlink.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Network Configuration Area
Features, Templates, Services, and Users,
Communications Manager 9.0 (SCCP and SIP)
Access
201