Perform Network Configuration Reset; Perform User Network Configuration Reset; Remove Ctl File - Cisco 8800 Series Maintenance Manual

Hide thumbs Also See for 8800 Series:

Maintenance

Procedure

Step 1

Disconnect the power supply.

Step 2

Press and hold the star (*) key.

Step 3

Reconnect the power. Continue pressing the star key until the Mute LED turns off.

Step 4

Release the star key.

The phone reboots from the backup image.

Perform Network Configuration Reset

Resets network configuration settings to their default values and resets the phone. This method causes DHCP

to reconfigure the IP address of the phone.

Procedure

Step 1

From the Administrator Settings menu, if required, unlock phone options.

Step 2

Choose Reset Settings > Network Setup.

Resets any user and network configuration changes that you have made, but that the phone has not written to

flash memory, to previously saved settings.

Procedure

Step 1

From the Administrator Settings menu, if required, unlock phone options.

Step 2

Choose Reset Settings > Reset Device.

Deletes only the CTL file from the phone.

Apply a Phone Password

Perform Network Configuration Reset

Maintenance

Table of Contents