Cisco Unified Ip Phone Cable Installation - Cisco 7975G Software Manual

Administration guide for cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7975G:
Table of Contents

Advertisement

Cisco Unified IP Phones Installation
Before You Begin
Remove the hookswitch clip, if necessary (see
Procedure
Step 1
Connect the handset to the Handset port.
Step 2
Connect a headset to the Headset port.
You can add a headset later if you do not connect one now.
See
Headset, on page 46
Step 3
Connect a wireless headset. You can add a wireless headset later if you do not want to connect one now.
Note
See the wireless headset documentation for information.
Step 4
Connect the power supply to the Cisco DC Adapter port.
See
Cisco Unified IP Phone Power, on page
Step 5
Connect a straight-through Ethernet cable from the switch to the 10/100/1000 SW port on the Cisco Unified
IP Phones 7975G and 7971G-GE, or to the 10/100 SW port on the Cisco Unified IP Phones 7970G, 7965G
and 7945G.
Each Cisco Unified IP Phone ships with one Ethernet cable in the box.
You can use either Category 3/5/5e/6 cabling for 10 Mbps connections, but you must use Category 5/5e/6 for
100 Mbps connections and Category 5e/6 for 1000 Mbps connections.
See
Network and Access Ports, on page 45
Step 6
Connect a straight-through Ethernet cable from another network device, such as a desktop computer, to the
10/100/1000 PC port on the Cisco Unified IP Phones 7975G and 7971G-GE, or to the 10/100 SW port on the
Cisco Unified IP Phones 7970G, 7965G and 7945G.
You can connect another network device later if you do not connect one now.
You can use either Category 3/5/5e/6 cabling for 10 Mbps connections, but you must use Category 5/5e/6 for
100 Mbps connections and Category 5e/6 for 1000 Mbps connections.
See
Network and Access Ports, on page 45

Cisco Unified IP Phone Cable Installation

See the following figure and table to connect your phone.
for supported headsets.
The Cisco Unified IP Phones 7971G-GE and 7970G do not support wireless headsets.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Cisco Unified IP Phone Cable Installation
Handset, on page
45), from the cradle area.
31.
for guidelines.
for guidelines.
Communications Manager 9.0 (SCCP and SIP)
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7971g-ge7970g7965g7945g

Table of Contents