Features, Templates, Services, And Users Overview - Cisco 7975G Software Manual

Features, Templates, Services, and Users
•
•
•
•
•
•
•
•
•
•
•
•

Features, Templates, Services, and Users Overview

After you install Cisco Unified IP Phones in your network, configure their network settings, and add them to
Cisco Unified Communications Manager, you must use Cisco Unified Communications Manager Administration
to configure telephony features, optionally modify phone templates, set up services, and assign users.
This chapter provides an overview of these configuration and setup procedures. Cisco Unified Communications
Manager documentation provides detailed instructions for these procedures.
For suggestions about how to provide users with information about features, and what information to provide,
see Internal Support Web Site, on page
For information about setting up phones in non-English environments, see
page
Features, Templates, Services, and Users Overview, page 123
Telephony Features Available for Cisco Unified IP Phone, page 124
Product-Specific Parameters, page 148
Corporate and Personal Directories, page 149
Phone Button Templates, page 150
Softkey Templates, page 153
Services Setup, page 153
Enable Device Invoked Recording, page 154
Cisco Unified Communications Manager User Addition, page 154
User Options Web Page Management, page 155
EnergyWise Setup on Cisco Unified IP Phone, page 157
UCR 2008 Setup, page 160
257.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
C H A P T E R
241.
Communications Manager 9.0 (SCCP and SIP)
5
International User Support, on
123