Cisco 7975G Software Manual page 225

Administration guide for cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7975G:
Table of Contents

Advertisement

Remote Monitoring
Item
User Locale Version
Network Locale Version
PC Port Disabled
Speaker Enabled
GARP Enabled
Video Capability
Enabled
Voice VLAN Enabled
Auto Line Select
DSCP for Call Control
DSCP for Configuration
DSCP for Services
Security Mode
Web Access Enabled
Span to PC Port
PC VLAN
Forwarding Delay
CDP: PC Port
CDP: SW Port
LLDP-MED: SW Port
LLDP: PC Port
LLDP Asset ID
Description
Version of the user locale loaded on the phone.
Version of the network locale loaded on the phone.
Indicates whether the PC port on the phone is enabled or disabled.
Indicates whether the speakerphone is enabled on the phone.
Indicates whether the phone learns MAC addresses from Gratuitous ARP
responses.
Indicates whether the phone can participate in video calls when connected to an
appropriately equipped PC.
Indicates whether the phone allows a device attached to the PC port to access the
Voice VLAN.
Indicates whether the phone shifts the call focus to incoming calls on all lines.
DSCP IP classification for call control signaling.
DSCP IP classification for any phone configuration transfer.
DSCP IP classification for phone-based services.
Displays the security mode that is set for the phone.
Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
Indicates whether the phone will forward packets transmitted and received on the
network port to the access port.
VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC.
Indicates whether the internal switch begins forwarding packets between the PC
port and switched port on the phone when the phone becomes active.
Indicates whether CDP is supported on the PC port.
Indicates whether CDP is supported on the switch port.
Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery
(LLDP-MED) is enabled on the switch port.
Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC
port.
Identifies the asset ID assigned to the phone for inventory management.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Network Configuration Area
Communications Manager 9.0 (SCCP and SIP)
205

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7971g-ge7970g7965g7945g

Table of Contents