X Authentication And Status Menus - Cisco 7975G Software Manual

802.1X Authentication and Status Menus

Option
Application Server
TVS Server
802.1X Authentication and Status Menus
The 802.1X Authentication and 802.1X Authentication Status menus allow you to enable 802.1X authentication
and monitor the progress. These options are described in the following tables.
You can access the 802.1X Authentication settings by pressing the Settings button and choosing Security
Configuration > 802.1X Authentication. To exit this menu, press Exit.
Table 34: 802.1X Authentication Menu Options
Option
Device Authentication
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
116
Description
Common Name (from the Cisco Unified
Communications Manager Certificate) of the
trusted application server used by the phone.
Also displays a certificate
A phone-trust certificate is used to
authenticate application servers with which
the phone communicates.
One Application Server menu item appears
for each phone-trust store whose certificates
have been uploaded into Cisco Unified OS
Administration and later downloaded into the
Cisco Unified IP Phone CTL file.
Common Name (from the Cisco Unified
Communications Manager Certificate) of the
trusted application server used by the phone.
Also displays a certificate
A phone-trust TVS certificate is used to
authenticate TVS servers with which the
phone communicates. There can be more than
one entry for the TVS servers.
Description
Determines whether 802.1X authentication
is enabled:
• Enabled: Phone uses 802.1X
authentication to request network
access.
• Disabled: Default setting in which the
phone uses CDP to acquire VLAN and
network access.
Cisco Unified IP Phone Settings
To change
For more information about phone-trust
certificates, see the following
documents:
icon.
• Cisco Unified Communications
Operating System Administration
Guide, "Security" chapter
• Cisco Unified Communications
Manager Security Guide,
"Security Overview" chapter
For more information, see the Cisco
Unified Communications Manager
System Administrator Guide.
icon.
To change
Voice Quality Troubleshooting
Tips, on page 238