Cisco 7975G Software Manual page 155

Features, Templates, Services, and Users
Feature Description
Hold Reversion Limits the amount of time that a call can be on hold before
reverting back to the phone that put the call on hold and
alerting the user.
Reverting calls are distinguished from incoming calls by
a single ring (or beep, depending on the new call indicator
setting for the line). This notification repeats at intervals
if not resumed.
A call that triggers Hold Reversion also displays an
animated icon in the call bubble and a brief message on
the status line.
You can configure call focus priority to favor incoming
or reverting calls.
Hold Status Enables phones with a shared line to distinguish between
the local and remote lines that placed a call on hold.
Hunt Group Display Provides load sharing for calls to a main directory number.
A hunt group contains a series of directory numbers that
can answer the incoming calls.
When an incoming call is offered to a directory number
that is part of the hunt group, this feature displays the
main directory number in addition to the calling party.
Immediate Divert Allows a user to transfer a ringing, connected, or held call
directly to a voice-messaging system. When a call is
diverted, the line becomes available to make or receive
new calls.
Immediate Allows users to transfer incoming calls directly to their
Divert—Enhanced voice messaging system or to the voice messaging system
of the original called party.
Intelligent Session Reroutes a direct call to a user mobile phone to the
Control enterprise number (desk phone). For an incoming call to
a remote destination (mobile phone), only the remote
destination rings; the desk phone does not ring. When the
call is answered on the mobile phone, the desk phone
displays a Remote in Use message. During these calls, a
user can use the various features of the mobile phone.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Telephony Features Available for Cisco Unified IP Phone
Configuration reference
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, "Hold Reversion" chapter.
No configuration required.
For more information, see:
• Cisco Unified Communications
Manager Administration Guide, "Hunt
Group Configuration" chapter
• Cisco Unified Communications
Manager System Guide, "Understanding
Route Plans" chapter
• Cisco Unified Communications
Manager Administration Guide, "CTI
Route Point Configuration" chapter
For more information, see the Cisco Unified
Communications Manager System Guide,
"Cisco Unified IP Phones" chapter.
For more information, see the Cisco Unified
Communications Manager System Guide,
"Cisco Unified IP Phones" chapter.
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, "Cisco Unified Mobility"
chapter.
Communications Manager 9.0 (SCCP and SIP)
135