Cisco 7975G Software Manual page 89

Cisco Unified IP Phone Settings
Option
PC VLAN
VPN
The following table describes the IPv4 Configuration menu options.
Table 12: IPv4 Configuration menu options
Option
DHCP
IP Address
Subnet Mask
Default Router 1
Default Router 2
Default Router 3
Default Router 4
Default Router 5
Description
Allows the phone to interoperate with
third-party switches that do not support a voice
VLAN. The Admin VLAN ID option must be
set before you can change this option.
Shows the VPN (virtual private network)
Client state:
• Connected
• Not Connected
(Supported only for the Cisco Unified IP
Phone 7945G, 7965G, and 7975G.)
Description
Indicates whether the phone has DHCP enabled
or disabled.
When DHCP is enabled, the DHCP server
assigns the phone an IPv4 address. When DHCP
is disabled, the administrator must manually
assign an IPv4 address to the phone.
Internet Protocol version 4 (IPv4) address of
the phone.
If you assign an IPv4 address with this option,
you must also assign a subnet mask and default
router. See Subnet Mask and Default Router 1
options in this table.
Subnet mask used by the phone.
Default router used by the phone (Default
Router 1) and optional backup routers (Default
Router 2–5).
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Network Configuration Menu
To Change
Set PC VLAN Field, on page 78
Display only. Cannot configure.
To change
Set DHCP Field, on page 78
Set IP Address Field, on page 78
Set Subnet Mask Field, on page 79
Set Default Router Fields, on page
79
Communications Manager 9.0 (SCCP and SIP)
69