Cisco 7975G Software Manual page 154

Telephony Features Available for Cisco Unified IP Phone
Feature Description
Enbloc Dialing Enbloc dialing enables SCCP to send all digits of a phone
number simultaneously. This feature must be disabled if
(SCCP phones only)
either Forced Authorization Codes (FAC) or Client Matter
Codes (CMC) dialing is being used.
Enhanced Secure Improves the Secure Extension Mobility Cross Cluster
Extension Mobility Cross (EMCC) feature by preserving the network and security
Cluster configurations on the login phone. By so doing, security
policies are maintained, network bandwidth is preserved
and network failure is avoided within the visiting cluster
(VC).
Fast Dial Service Allows a user to enter a Fast Dial code to place a call.
Fast Dial codes can be assigned to phone numbers or
Personal Address Book entries. (See Services in this
table.)
Forced Authorization Controls the types of calls that certain users can place.
Codes (FAC)
Note
(SCCP phones only)
Group Call Pickup Allows a user to answer a call that is ringing on a directory
number in another group.
Help system Provides a comprehensive set of topics that appear on the
phone screen.
Hold/Resume Allows the user to move a connected call between an
active state and a held state.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
134
If you are using this feature, you must disable
Enbloc dialing. See Enbloc Dialing in this table
for details.
Features, Templates, Services, and Users
Configuration reference
To disable enbloc dialing, in Cisco Unified
Communications Manager Administration,
go to Device > Phone. On the Phone
Configuration window, in the Product
Specific Configuration Layout area, uncheck
the Enbloc Dialing check box, click Apply
Config, and click Save.
For more information, see Cisco Unified
Communications Manager Features and
Services Guide.
For more information, see:
• Cisco Unified Communications
Manager Administration Guide, "Cisco
Unified IP Phone Configuration" chapter
• Cisco Unified Communications
Manager System Guide, "Cisco Unified
IP Phone Services" chapter
For more information, see the Cisco
Unified Communications Manager Features
and Services Guide, "Client Matter Codes and
Forced Authorization Codes" chapter.
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, "Call Pickup" chapter.
No configuration required.
Requires no configuration, unless you want
to use Music on Hold. See the "Music on
Hold" entry in this table for more information.
Also, see the "Hold Reversion" entry in this
table.