Firmware Version Items; Expansion Modules Screen; Display Expansion Modules Screen - Cisco 7975G Software Manual

Expansion Modules Screen

Procedure
Step 1 Press Settings.
Step 2 Select Status.
Step 3 Select Firmware Version.
Step 4
To exit the Firmware Version screen, press Exit.

Firmware Version Items

Table 45: Firmware Version Information
Item
Load File
App Load ID
JVM Load ID
OS Load ID
Boot Load ID
Expansion Module 1
Expansion Module 2
DSP Load ID
Expansion Modules Screen
The Expansion Modules screen displays information about each Cisco Unified IP Phone Expansion Module
that is connected to the phone.
Expansion Module Items, on page 191
expansion module. You can use this information to troubleshoot the expansion module, if necessary. In the
Expansion Modules screen, a statistic preceded by "A" applies to the first expansion module. A statistic
preceded by "B" applies to the second expansion module.

Display Expansion Modules Screen

To display the Expansion Modules screen, follow these steps:
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
190
Description
Load file running on the phone
JAR file running on the phone
Java Virtual Machine (JVM) running on the phone
Operating system running on the phone
Ffactory-installed load running on the phone
Load running on the Expansion Modules, if connected to a SIP or SCCP
phone
Digital signal processor (DSP) software version used
explains the information displays on this screen for each connected
Model Information, Status, and Statistics