Cisco 7975G Software Manual page 207

Model Information, Status, and Statistics
Item
One of the following
values:
• Initialized
• TCP-timeout
• CM-closed-TCP
• TCP-Bad-ACK
• CM-reset-TCP
• CM-aborted-TCP
• CM-NAKed
• KeepaliveTO
• Failback
• Phone-Keypad
• Phone-Re-IP
• Reset-Reset
• Reset-Restart
• Phone-Reg-Rej
• Load Rejected HC
• CM-ICMP-Unreach
• Phone-Abort
Elapsed Time
Port 1
Port 2 (applies to 7911G
only)
Description
Cause of the last phone reset
Amount of time that has elapsed since the phone connected to
Cisco Unified Communications Manager
Link state and connection of the Network port
Link state and connection of the PC port. For example, Auto 100 Mb
Full-Duplex means that the PC port is in a link up state and has autonegotiated
a full-duplex, 100-Mbps connection.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Network Statistics Screen
Communications Manager 9.0 (SCCP and SIP)
187