Cisco 7975G Software Manual page 85

Cisco Unified IP Phone Settings
Category
DHCP settings
IP settings
TFTP settings for
TFTP IPv4 servers
IPv6 Network Settings
DHCP settings
IP settings
TFTP settings for
TFTP IPv6 servers
(SCCP phones
only)
Related Topics
Display Settings Menu, on page 62
Description
Dynamic Host Configuration Protocol
(DHCP) automatically assigns IP address
to devices when you connect them to the
network. Cisco Unified IP Phones enable
DHCP by default.
If you do not use DHCP in your network,
you can make IP settings manually.
If you do not use DHCP to direct the
phone to a TFTP server, you must
manually assign a TFTP server. You can
also assign an alternative TFTP server to
use instead of the one assigned by DHCP.
Dynamic Host Configuration Protocol
(DHCP) automatically assigns IP address
to phone when you connect them to the
network. Cisco Unified IP Phones enable
DHCP by default.
If you do not use DHCP in your network,
you can make IP settings manually.
If you do not use DHCP to direct the
phone to a TFTP server, you must
manually assign a TFTP server. You can
also assign an alternative TFTP server to
use instead of the one that DHCP assigns.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Phone Setup Options
Network Configuration menu option
DHCP
DHCP Address Released
Domain Name
IP Address
Subnet Mask
Default Router 1-5
DNS Server 1-5
TFTP Server 1
Alternate TFTP
TFTP Server 2
DHCPv6
DHCPv6 Address Released
Domain Name
IPv6 Address
IPv6 Prefix Length
IPv6 DNS Server 1-2
IPv6 TFTP Server 1
IPv6 Alternate TFTP
IPv6 TFTP Server 2
Communications Manager 9.0 (SCCP and SIP)
65