Cisco 7975G Installation Manual
Unified ip phones
Hide thumbs
Also See for 7975G:
- Software manual (302 pages) ,
- Administration manual (217 pages) ,
- Troubleshooting and maintenance (25 pages)
Table of Contents
Advertisement
Quick Links
Cisco Unified IP Phones Installation
•
•
•
•
•
•
•
•
•
•
•
Phone Installation Overview
This chapter helps you install the Cisco Unified IP Phones on an IP telephony network.
Before you install a Cisco Unified IP Phone, you must decide how to configure the phone in your network.
Note
Then you can install the phone and verify the functionality. For more information, see
Phones and Telephony
Before You Begin
Before you install the Cisco Unified IP Phone, review the requirements in these sections:
Phone Installation Overview, page 1
Before You Begin, page 1
Cisco Unified IP Phone Components, page 2
Install Cisco Unified IP Phone, page 6
Cisco Unified IP Phone Expansion Module, page 8
Footstand Adjustment, page 11
Phone Cable Lock, page 11
Mount Phone on Wall, page 13
Phone Startup Process, page 15
Network Settings, page 16
Cisco Unified IP Phone Security, page 16
Networks.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
Cisco Unified IP
1
Advertisement
Table of Contents
Related Manuals for Cisco 7975G
Summary of Contents for Cisco 7975G
-
Page 1: Phone Installation Overview
Phone Installation Overview This chapter helps you install the Cisco Unified IP Phones on an IP telephony network. Before you install a Cisco Unified IP Phone, you must decide how to configure the phone in your network. Note Then you can install the phone and verify the functionality. For more information, see... -
Page 2: Network Requirements
Cisco Unified IP Phones Installation Network Requirements Network Requirements For the Cisco Unified IP Phone to successfully operate as a Cisco Unified IP Phone endpoint in your network, your network must meet these requirements: • Working VoIP network: ◦ VoIP configured on your Cisco routers and gateways ◦... -
Page 3: Network And Access Ports
Cisco Unified IP Phone 7970G does not support 1000 Mbps). • For the Cisco Unified IP Phones 7965G and 7945G, you can use either Category 3, 5, 5e, or 6 cabling for 10 Mbps connections, but you must use Category 5, 5e, or 6 for 100 Mbps connections. -
Page 4: Disable Speakerphone
Beyond physical, mechanical, and technical performance, the audio portion of a headset must sound good to the user and the party on the far end. Sound quality is subjective and Cisco cannot guarantee the performance of any headsets or handsets. However, a variety headsets from leading headset manufacturers have been reported to perform well with Cisco Unified IP Phones. -
Page 5: Headset Connection
Headset Connection To connect a headset to the Cisco Unified IP Phone, plug it into the Headset port on the back of the phone. Press the Headset button on the phone to place and answer calls by using the headset. -
Page 6: External Device Use
[89/336/EC]. Install Cisco Unified IP Phone You must connect the Cisco Unified IP Phone to the network and to a power source before use. For the description of how to connect the cables to the phone, see Cisco Unified IP Phone Cable Installation, on page Before you install a phone, even if it is new, upgrade the phone to the current firmware image. -
Page 7: Cisco Unified Ip Phone Cable Installation
Connect a straight-through Ethernet cable from another network device, such as a desktop computer, to the 10/100/1000 PC port on the Cisco Unified IP Phones 7975G and 7971G-GE, or to the 10/100 SW port on the Cisco Unified IP Phones 7970G, 7965G and 7945G. -
Page 8: Cisco Unified Ip Phone Expansion Module
Cisco Unified IP Phone Expansion Module The Cisco Unified IP Phone Expansion Module can be attached to Cisco Unified IP Phone to extend the number of line appearances or speed dial buttons. You can customize the button templates for the Cisco Unified IP Phone Expansion Module to determine the number of line appearances and speed-dial buttons. -
Page 9: Set Up Cisco Unified Ip Phone Expansion Module
Cisco Unified IP Phones Installation Set up Cisco Unified IP Phone Expansion Module You can attach one or more Cisco Unified IP Phone Expansion Modules to the Cisco Unified IP Phone 7975G and 7965G by using one of the following methods: •... -
Page 10: Feature Key Capacity Increase For Cisco Unified Ip Phones
1 field, select 7914 14-Button Line Expansion Module. Step 7 To add support for a second expansion module on Cisco Unified IP Phones 7975G and 7965G, in the Module 2 field, choose one of the following: • 7914 14-Button Line Expansion Module for the Cisco Unified IP Phone Expansion Modules 7914 •... -
Page 11: Set Up Additional Buttons
Phone Cable Lock You can secure the Cisco Unified IP Phones to a desktop with a laptop cable lock. The lock connects to the security slot on the back of the phone, and the cable can be secured to a desktop. - Page 12 Cisco Unified IP Phones 7945G, 7965G, and 7975G Cable Lock Cisco Unified IP Phones 7945G, 7965G, and 7975G Cable Lock For an illustration on how to connect a cable lock to the Cisco Unified IP Phones 7945G, 7965G, and 7947G, see the following figure.
-
Page 13: Mount Phone On Wall
Cisco Unified IP Phone wall mount kit. Wall mount kits must be ordered separately from the phone. If you attach the Cisco Unified IP Phone to a wall with the standard footstand and not the wall mount kit, you need to supply the following tools and parts: •... - Page 14 Insert two screws into a wall stud, matching them to the two screw holes on the back of the footstand. The keyholes fit standard phone jack mounts. Step 4 Hang the phone on the wall. Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
-
Page 15: Phone Startup Process
Cisco Unified IP Phones Installation Phone Startup Process Phone Startup Process After the Cisco Unified IP Phone has power connected to it, the phone begins its startup process by cycling through these steps. 1 These buttons flash on and off in sequence: •... -
Page 16: Network Settings
• The CTL or ITL file should have a CAPF certificate. • On Cisco Unified Communications Operating System Administration, verify that the CAPF certificate has been installed. Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP) - Page 17 From the phone, press the Settings > Security Configuration. Note You can control access to the Settings Menu by using the Settings Access field in the Cisco Unified Communications Manager Administration Phone Configuration window. For more information, see Cisco Unified Communications Manager Administration Guide.
- Page 18 Cisco Unified IP Phones Installation Install Locally Significant Certificate Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)