Call Preferences Menu For Sip Phones - Cisco 7975G Software Manual

Cisco Unified IP Phone Settings
Option
Longer
Authentication
Name
Display Name
Proxy Address
Proxy Port
Shared Line
Related Topics
Display Settings Menu, on page 62
Device Configuration Menu, on page 85

Call Preferences Menu for SIP Phones

The Call Preferences menu displays settings that relate to the settings for the call preferences on a SIP phone.
The following table describes the options in this menu.
Description
Displays the name used by the phone
for authentication if a registration is
challenged by the call control server
during initialization.
The length of the SIP digest
authentication name has been increased
to 128 characters for Cisco Unified
7900 Series SIP phones. The
authentication name is used to verify
that the phone is allowed to send SIP
messages (REGISTER, INVITE, and
SUBSCRIBE) to Cisco Unified
Communications Manager.
Displays the identification the phone
uses for display for caller identification
purposes.
The value is left blank because it does
not apply to SIP phones that are using
Cisco Unified Communications
Manager.
The value is left blank because it does
not apply to SIP phones that are using
Cisco Unified Communications
Manager.
Displays if the line is part of a shared
line (Yes) or not (No).
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Call Preferences Menu for SIP Phones
To change
Use Cisco Unified Communications Manager
Administration to modify.
Use Cisco Unified Communications Manager
Administration to modify.
Display only. Cannot configure.
Display only. Cannot configure.
Display only. Cannot configure.
Communications Manager 9.0 (SCCP and SIP)
89