Cisco 7975G Software Manual page 156

Telephony Features Available for Cisco Unified IP Phone
Feature Description
Intercom Allows users to place and receive intercom calls using
programmable phone buttons. You can configure intercom
line buttons to:
Note
Join/Select Creates a conference by joining together existing calls
that are on a single phone line.
Join Across Lines/Select Allows users to apply the Join feature to calls that are on
multiple phone lines.
Line Select If this feature is disabled (default), then the ringing line
is selected. When enabled, the primary line is picked up
even if a call is ringing on another line. The user must
manually select the other line.
Note
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
136
• Directly dial a specific intercom extension.
• Initiate an intercom call and then prompt the user
to enter a valid intercom number.
If a user logs into the same phone on a daily basis
using their Cisco Extension Mobility profile,
assign the phone button template that contains
intercom information to their profile, and assign
the phone as the default intercom device for the
intercom line.
This feature can also be enabled or disabled for
Extension Mobility.
Features, Templates, Services, and Users
Configuration reference
For more information, see the Cisco Unified
Communications Manager Feature and
Services Guide, "Intercom" chapter.
For more information, see the Cisco Unified
IP Phone 7975G, 7971G-GE, 7970G, 7965G,
and 7945G User Guide for Cisco Unified
Communications Manager (SCCP and SIP),
"Calling Features" chapter, "Making
Conference Calls" section.
For more information, see:
• Softkey Templates, on page 153
• Cisco Unified Communications
Manager System Guide, "Cisco Unified
IP Phones" chapter
For more information, see the "Always use
prime line" option in the following chapters
of Cisco Unified Communications Manager
Administration Guide:
• Device Profile Configuration
• Common Phone Profile Configuration
• Cisco Unified IP Phone Configuration