Product-Specific Parameters - Cisco 7975G Software Manual

Product-Specific Parameters

Feature
VPN Client
(Cisco Unified IP Phone
7945G, 7965G, and
7975G only)
Product-Specific Parameters
Cisco Unified Communications Manager Administration allows you to set some product specific configuration
parameters for Cisco Unified IP Phones. The following table lists the configuration windows and path in Cisco
Unified Communications Manager Administration.
Table 38: Configuration Windows for Cisco Unified IP Phone
Configuration window
Enterprise Phone Configuration window
Common Phone Profile window
Phone Configuration window
You can set the following parameters in any of the three configuration windows:
• Settings Access
• Video Capabilities
• Web Access
• Load Server
• RTCP
• Peer Firmware Sharing
• Cisco Discovery Protocol (CDP): Switch Port
• Cisco Discovery Protocol (CDP): PC Port
• Link Layer Discovery Protocol - Media Endpoint Discover (LLDP-MED): Switch Port
• Link Layer Discovery Protocol (LLDP): PC Port
• IPv6 Load Server
• 802.1x Authentication
• Switch Port Remote Configuration
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
148
Description
Provides a VPN connection using SSL on Cisco Unified
IP Phone 7945G, 7965G, and 7975G for situations in
which a phone is located outside a trusted network or
when network traffic between the phone and Cisco
Unified Communications Manager must cross untrusted
networks.
Configuration reference
For more information, see Cisco Unified
Communications Manager Security Guide,
"Virtual Private Network Configurations"
chapter.
Path
System > Enterprise Phone Configuration
Device > Device Settings > Common Phone Profile
Device > Phone; Product Specific Configuration area of window
Features, Templates, Services, and Users