Cisco 7975G Software Manual page 161

Features, Templates, Services, and Users
Feature Description
Remote Port Allows the administrator to configure the speed and
Configuration duplex function of the phone Ethernet ports remotely by
using Cisco Unified Communications Manager
Administration. This enhances the performance for large
deployments with specific port settings.
Note
Ring Setting Identifies ring type used for a line when a phone has
another active call.
Ringer Volume Control The Ringer Volume Control feature enables the system
administrator to control the minimum ringer-volume
setting and adjust the minimum volume level for the
ringer. Individual users cannot make the changes to the
minimum ringer-volume setting.
When a user presses the minus (–) side of the Volume
button to reduce the ringer volume in an on-hook state,
the volume decreases only to the configured minimum
volume-level setting. When the minimum volume level
is reached, no status message appears.
After a system restart, the minimum ringer volume resets
to the minimum ringer-volume setting that is received
from the configuration file. If the system administrator
configured a new minimum volume level since the last
startup and the end user had previously set the minimum
ringer volume lower, the ringer volume will be set to the
minimum value from the configuration file, not to the
user setting.
This feature does not apply to handset, speaker, and
headset volumes during calls.
If the ports are configured for Remote Port
Configuration in Cisco Unified Communications
Manager, the data cannot be changed on the
phone.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Telephony Features Available for Cisco Unified IP Phone
Configuration reference
To configure the parameter in the Cisco
Unified Communications Manager
Administration application, choose Device >
Phone, select the appropriate IP phones, and
scroll to the Product Specific Configuration
Layout pane (Switch Port Remote
Configuration or PC Port Remote
Configuration).
To configure the setting on multiple phones
simultaneously, configure the Remote Port
Configuration in the Enterprise Phone
Configuration (System > Enterprise Phone
Configuration).
For more information, see:
• Cisco Unified Communications
Manager Administration Guide,
"Directory Number Configuration"
chapter
• Custom Phone Ring Creation, on page
166
To configure the parameter in the Cisco
Unified Communications Manager
Administration application, choose Device >
Phone, select the appropriate IP phones, and
scroll to the Product Specific Configuration
Layout pane.
Communications Manager 9.0 (SCCP and SIP)
141