Upgrading Firmware; Determining The Current Firmware Version; Cisco Spa500 Series And Wip310 Ip Phone Administration Guide - Cisco 501G Administration Manual

Getting Started

Upgrading Firmware

Upgrading Firmware

STEP 1
STEP 2

Cisco SPA500 Series and WIP310 IP Phone Administration Guide

Phones should be upgraded to the latest firmware before using any administration
features. There are various ways to upgrade your firmware:
All Phones
• Cisco SPA9000 Voice System Setup Wizard—If you are using the Cisco
SPA500 Series and Wireless-G IP Phones with a SPA9000,
Cisco SPA9000 Voice System Setup Wizard to upgrade your phones.
SPA9000 Voice System Setup Wizard User Guide
• Autoprovisioning—A configuration file that includes upgrade information is
downloaded by a user's phone when it is powered on. See the
Resyncing, and Rebooting Phones" section on page
SPA50XG and WIP310
• Firmware Upgrade Executable File (SPA50X or WIP310)—Download the
firmware upgrade utility from the product page on
desktop and run the upgrade from your PC by double-clicking the
executable file. Your computer must be on the same network as the Cisco
SPA500 Series and Wireless-G IP Phone.
SPA525G
• Web Interface (SPA525G)—You can download the latest firmware onto your
PC desktop and use the web interface to upgrade your firmware.
WIP310
• TFTP/HTTP server—The latest firmware image file is loaded onto an HTTP/
TFTP server and is accessed by a web browser. See the
User Guide
for more information.

Determining the Current Firmware Version

Before upgrading, determine the current firmware version:
SPA501G:
Press the Setup button.
In the IVR menu, enter 150, then press #. The firmware version is recited.
1
you can use the
Cisco
See the
.
"Upgrading,
121.
Cisco.com to your PC
Cisco WIP310
7