Getting Started
Upgrading Firmware
Upgrading Firmware
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
Phones should be upgraded to the latest firmware before using any administration
features. There are various ways to upgrade your firmware:
All Phones
•
Cisco SPA 9000 Voice System Setup Wizard—If you are using the Cisco
SPA IP Phones with a Cisco SPA 9000, you can use the Cisco SPA 9000
Voice System Setup Wizard to upgrade your phones. See the
9000 Voice System Setup Wizard User Guide
does not support the Cisco SPA 300 Series IP Phones.)
•
Autoprovisioning—A configuration file that includes upgrade information is
downloaded by a user's phone when it is powered on. See the
Resyncing, and Rebooting Phones" section on page
Cisco SPA 30X, Cisco SPA 50XG, and WIP310
•
Firmware Upgrade Executable File (Cisco SPA 30X, Cisco SPA 50X or
WIP310)—Download the firmware upgrade utility from the product page on
Cisco.com
to your PC desktop and run the upgrade from your PC by
double-clicking the executable file. Your computer must be on the same
network as the Cisco SPA IP Phone.
Cisco SPA 525G/525G2
•
Configuration Utility (Cisco SPA 525G/525G2)—You can download the
latest firmware onto your PC desktop and use the configuration utility to
upgrade your firmware.
WIP310
•
TFTP/HTTP server—The latest firmware image file is loaded onto an HTTP/
TFTP server and is accessed by a web browser. See the
User Guide
for more information.
Determining the Current Firmware Version
Before upgrading, determine the current firmware version:
Cisco SPA
. (Note: The Setup Wizard
"Upgrading,
145.
Cisco WIP310
1
8