Call Preferences Menu (Sip Phones Only) - Cisco 7945G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-7 Line Settings Menu Options (continued)
Option
Proxy Address
Proxy Port
Shared Line
Related Topics
•
•

Call Preferences Menu (SIP Phones Only)

The Call Preferences menu displays settings that relate to the settings for the call preferences on a SIP
phone.
Table 4-8 Call Preferences Menu Options
Option
Caller ID Blocking
Anonymous Call Block
Call Waiting
Preferences
Call Hold Ringback
Stutter Msg Waiting
Call Logs BLF Enabled Indicates whether BLF for call logs is enabled (Yes)
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Description
The value is left blank because it is not applicable to SIP
phones that are using Cisco Unified Communications
Manager.
The value is left blank because it is not applicable to SIP
phones that are using Cisco Unified Communications
Manager.
Displays if the line is part of a shared line (Yes) or not
(No).
Displaying a Configuration Menu, page 4-2
Device Configuration Menu, page 4-11
Table 4-8 describes the options in this menu.
Description
Indicates whether caller ID blocking is enabled (Yes)
or disabled (No) for the phone.
Indicates whether anonymous call block is enabled
(Yes) or disabled (No) for the phone.
Displays a sub-menu that indicates whether call
waiting is enabled (Yes) or disabled (No) for each
line.
Indicates whether the call hold ringback feature is
enabled (Yes) or disabled (No) for the phone.
Indicates whether stutter message waiting is enabled
(Yes) or disabled (No) for the phone.
or disabled (No) for the phone.
Device Configuration Menu
To Change
Display only—Cannot configure.
Display only—Cannot configure.
Display only—Cannot configure.
To Change
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
Use Cisco Unified Communications
Manager Administration to modify.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
Use Cisco Unified Communications
Manager Administration to modify.
4-15