Configuring System Settings; Configuring General System Settings - Honeywell Performance Series User Manual

Configuring System Settings

This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•

Configuring General System Settings

You can configure the device name, user interface language, video standard, and maximum
log quantity settings on the Setup > System > General > General page.
To change the device name, in the Device Name field, enter a new name, and then click Save.
To change the interface language, select a language from the Language list, and then click Save.
To change the video standard, select NTSC or PAL from the Video Standard list, and then click
Save.
To change the Max Log Quantity, enter a value between 1 and 1024, and then click Save.
Configuring General System Settings, page 71
Configuring Date and Time Settings, page 72
Configuring Account Settings, page 73
Resetting the Camera, page 78
Backing Up/Restoring a Configuration, page 78
Configuring Maintenance Settings, page 79
Upgrading the Firmware, page 79
Viewing Version Information, page 79
Managing Logs, page 80
Viewing Online Users, page 81
8
8
800-23288 - A - 07/2017