Alarm Input; Alarm Output - Honeywell 35 Series User Manual

Alarm Input

Alarm input: Check the checkbox of Alarm input.
Name: Enter the alarm input name.
Current mode: Select the current mode from the drop-down list box.
Defence time: Configure the schedule by using one of the methods below.
Click left mouse button to select any time point within 0:00-24:00 from Monday to

Sunday.
 Hold down the left mouse button, drag and release mouse to select the schedule
within 0:00-24:00 from Monday to Sunday.
Output channel: Select the Output channel.
Alarm record/SMTP: Check the check boxes to enable Alarm record and SMTP.
PTZ linkage: Check the check boxes to enable PTZ linkage.
After the event is triggered, the system will run or stop the movement of the
corresponding type according to the settings.
PTZ type: Select Preset/Scan/Patrol/Recording Patrol.

Value: Select the value.

Operate: Select Invoke/Pause/Continue when PTZ type is Patrol.

－ Invoke: Call related PTZ linkage for running Patrol.
－ Pause: Pause related PTZ linkage Patrol.
－ Continue: Continue related PTZ linkage running Patrol.
PTZ linkage function is only applicable for PTZ models HC35WZ2R25/HC35WZ5R30/
Note:
HC35WZ5R30W.

Alarm Output

Name: Alarm output name
Current Signal: Select Grounded or Open to define normal status for the alarm output.
Connect the output cable to an external device, the camera will report the current signal
output status according to alarm event setting.
Grounded: Camera alarm relay is Normal Open. It will turn to Grounded/Closed

when an alarm event is generated to trigger it.
Honeywell 35 Series IP Cameras User Guide
45