Configuring Video Settings; Mode; Figure 4-3 Mode - Honeywell 60 Series Configuration Manual

Sensitivity: Adjust the responsiveness of the IR filter to lighting conditions as Low, Normal, or
High.

Configuring Video Settings

Go to Setup Camera Setup  Video.
This section describes how to configure viewing window and video streaming properties
(format, resolution, frame rate, bit rate, I-frame interval, etc.).

Mode

Go to Setup Camera Setup  Video Mode.

Figure 4-3 Mode

5-Megapixel (4:3) (MAX 30fps): Select it and the maximum resolution will be 2560x1920.
The aspect ratio will be 4:3.
4-Megapixel (16:9) (Max 60fps Non-True WDR): Select it and the maximum resolution will
be 2560x1440. The aspect ratio will be 16:9.
2-Megapixel (16:9) (Max 60fps): Select it and the maximum resolution will be 1920x1080.
The aspect ratio will be 16:9.
2-Megapixel (16:9) (Max 30fps): Select it and the maximum resolution will be 1920x1080.
The aspect ratio will be 16:9.
•
5-Megapixel and 4-Megapixel are applicable for
HC60W35R2/HC60W45R2/HC60WB5R2/HC60W35R4/HC60W45R4/HC60
Note
WB5R5.
•
2-Megapixel is applicable for HC60WZ2E30.
Changing the video mode will clear the following settings: privacy mask, exposure
Note
widow, motion, preset position and focus window.
Configuring Camera Settings
21