Show Cam-Ipv4Flow - Dell Force10 S4810P Reference Manual

pbr
qos
system-flow
value
trace-list
Defaults See Parameters.
Command Modes CONFIGURATION
Command History
Version 6.3.1.0
Usage CAM profile changes take effect after the next chassis reboot.
Information
Related
copy
Commands

show cam-ipv4flow

show cam-ipv4flow
Display details about the IPv4Flow sub-regions.
TeraScale
Syntax show cam-ipv4flow
Command Modes EXEC Privilege
Command History
Version 6.3.1.0
Usage If the IPv4Flow sub-region has been changed, this command displays the current IPv4Flow
Information configuration in one column and in the other column displays the IPv4Flow configuration that
will be loaded after the next reboot.
Example (C-
FTOS#show cam-ipv4flow
Series)
-- Chassis Cam Ipv4Flow --
Acl
Multicast Fib/Acl : 9K 12K
Pbr
Qos
System Flow
Trace Lists
value
Enter the keyword pbr followed by the number of entries for the PBR
sub-region in 1K increments. The range is 1 to 32 KB. The default is 1
KB.
value
Enter the keyword qos followed by the number of entries for the QoS
sub-region in 1K increments. The range is 1 to 32 KB. The default is 8
KB.
Enter the keywords system-flow followed by the number of
entries for the system-flow sub-region in 1K increments. The range is
4 to 32 KB. The default is 5 KB.
value
Enter the keywords trace-list followed by the number of entries
for the trace-list sub-region in 1K increments. The range is 1 to 32 KB.
The default is 1 KB.
Introduced on the E-Series.
– saves the running configuration.
– displays the CAM IPv4flow entries.
Introduced on the E-Series.
Current Settings Next Boot
: 8K 5K
: 1K 1K
: 8K 8K
: 5K 5K
: 1K 1K
585