debug ip bgp keepalives
Allows you to view information about BGP keepalive messages.
C-Series, E-Series
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name]
keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] keepalives [in | out] command.
Parameters
ipv6-address
peer-group
group-name
in
out
Command Modes
EXEC Privilege
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
Information
debug ip bgp notifications
Allows you to view information about BGP notifications received from neighbors.
C-Series, E-Series
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name]
notifications [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] notifications [in | out] command.
Parameters
ipv6-address
498
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-
(OPTIONAL) Enter the keywords peer-group followed by the name
of the peer group.
(OPTIONAL) Enter the keyword in to view only information on
inbound keepalive routes.
(OPTIONAL) Enter the keyword out to view only information on
outbound keepalive routes.
Introduced on the E-Series ExaScale.
Introduced
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.