Show Stack-Unit Stack-Ports Ets Detail - Dell Force10 S4810P Reference Manual

show stack-unit stack-ports ets detail

Displays the ETS configuration applied to egress traffic on stacked ports, including ETS Operational mode on each unit
and the configurated priority groups with dot1p priorities, bandwidth allocation, and scheduler type.
S4810
Syntax show stack-unit {all | stack-unit} stack-ports {all | port-
number} ets detail
Parameters
stack-unit
port-number
Command Modes EXEC Privilege
Command History
Version 8.3.12.0
Version 8.3.16.0
Example
FTOS(conf)# show stack-unit all stack-ports all ets details
(Summary)
Stack unit 0 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority#
------------------------------------------------
0
1
2
3
4
5
6
7
8
Stack unit 1 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority#
------------------------------------------------
0
1
2
3
4
5
6
Enter the stack unit identification.
Enter the port number.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Bandwidth TSA
0,1,2,3,4,5,6,7 100%
- -
- -
- -
- -
- -
- -
- -
- -
Bandwidth TSA
0,1,2,3,4,5,6,7 100%
-
-
-
-
-
-
ETS
ETS
-
-
-
-
-
-
623