Network Backdoor; Redistribute - Dell Force10 S4810P Reference Manual

Command History
Version 8.2.1.0
Version 7.4.1.0
Usage The E-Series software resolves the network address configured by the network command
Information
with the routes in the main routing table to ensure that the networks are reachable via non-
BGP routes and non-default routes.
Related

redistribute

Commands

network backdoor

Specify this IGP route as the preferred route.
C-Series, E-Series
Syntax network ipv6-address prefix-length backdoor
To remove a network, use the no network ipv6-address prefix-length
backdoor command.
Parameters
ipv6-address
prefix-length
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage Though FTOS does not generate a route due to backdoor config, there is an option for injecting/
Information sourcing a local route in presence of network backdoor config on a learned route.
redistribute
Redistribute routes into BGP.
E-Series
Syntax redistribute {connected | static} [route-map map-name]
To disable redistribution, use the no redistribution [connected | static]
[route-map map-name] command.
Parameters
connected
Introduced on the E-Series ExaScale.
Introduced
– redistributes routes into BGP.
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The r range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Introduced on the E-Series ExaScale.
Introduced
Enter the keyword connected to redistribute routes from physically
connected interfaces.
521