Bgp Soft-Reconfig-Backup; Capture Bgp-Pdu Neighbor (Ipv6) - Dell Force10 S4810P Reference Manual

Command Modes ROUTER BGP
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage Peering sessions are reset when you change the router ID of a BGP router.
Information

bgp soft-reconfig-backup

only when route-refresh is not negotiated to avoid the peer from resending messages.
Use this command
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax bgp soft-reconfig-backup
To return to the default setting, use the no bgp soft-reconfig-backup command.
Defaults Off
Command Modes ROUTER BGP
Command History
Version 9.1(0.0)
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.2.1.0
Usage
When you enable soft-reconfiguration for a neighbor and you execute the clear ip bgp
Information
soft in command, the update database stored in the router is replayed and updates are
reevaluated. With this command, the replay and update process is triggered only if route-
refresh request is not negotiated with the peer. If the request is indeed negotiated (after
executing the clear ip bgp soft in command), BGP sends a route-refresh request to
the neighbor and receives all of the peer's updates.
Related clear ip bgp
Commands

capture bgp-pdu neighbor (ipv6)

Enable capture of an IPv6 BGP neighbor packet.
C-Series, E-Series
Syntax capture bgp-pdu neighbor ipv6-address direction {both | rx |
tx}
To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-pdu
neighbor ipv6-address command.
488
Introduced on the E-Series ExaScale.
Introduced
Added support for IPv6.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
– activates inbound policies without resetting the BGP TCP session.