Show Environment (S-Series) - Dell Force10 S4810P Reference Manual

7 active 48C up up
8 active 47C up up
Example (E600)
FTOS#show environment fan
-- Fan Status --
Status Temp Fan1 Fan2 Fan3 Serial Num Version
------------------------------------------------------
up 29C 6000 RPM 7500 RPM 7500 RPM 0.0
FTOS#
Example (C300)
FTOS#show env fan
-- Fan Status --
-------------------------------------------------------
Tray 0
-------------------------------------------------------
FanNumber Speed Status
0 4170 up
1 4140 up
2 3870 up
3 4140 up
4 3870 up
5 3810 up
FTOS#

show environment (S-Series)

View S-Series system component status (for example, temperature or voltage).
S-Series, Z-Series
Syntax show environment [all | fan | stack-unit unit-id | pem]
Parameters
all
fan
stack-unit
pem
Command Modes
Command History
Version 8.3.11.1
Version 7.8.1.0
152
Enter the keyword all to view all components.
Enter the keyword fan to view information on the fans. The output of
this command is chassis dependent.
unit-id
Enter the keyword stack-unit followed by the unit-id to display
information on a specific stack member. The range is 0 to 1.
Enter the keyword pem to view only information on power entry
modules.
• EXEC
• EXEC Privildge
Introduced on the Z9000.
The output of the show environment fan command for the S-
Series is changed to display fan speeds instead of showing the fan
status as up or down.