Neighbor Advertisement-Interval; Neighbor Default-Originate - Dell Force10 S4810P Reference Manual

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.
C-Series, E-Series TeraScale, S-Series
Syntax neighbor {ip-address | peer-group-name} advertisement-interval
seconds
To return to the default value, use the no neighbor {ip-address | peer-group-
name} advertisement-interval command.
Parameters
ip-address
peer-group-name
seconds
Defaults
Command Modes ROUTER BGP Address Family (conf-router_bgp_af)
Command History
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0

neighbor default-originate

Inject the default route to a BGP peer or neighbor.
C-Series, E-Series TeraScale, S-Series
Syntax neighbor {ip-address | peer-group-name} default-originate
[route-map map-name]
To remove a default route, use the no neighbor {ip-address | peer-group-
name} default-originate command.
Parameters
ip-address
peer-group-name
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
Enter a number as the time interval, in seconds, between BGP
advertisements. The range is 0 to 600 seconds. The default is 5
seconds for internal BGP peers and 30 seconds for external BGP
peers.
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Introduced on the S-Series.
Introduced on the C-Series.
Introduced IPv6 MGBP on the E-Series.
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
Enter the name of the peer group to set the default route of all routers
in that peer group.
447