Show Mac Access-Lists - Dell Force10 S4810P Reference Manual

Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage You can assign one ACL (standard or extended) to an interface.
Information
Related
mac access-list standard
Commands
mac access-list extended

show mac access-lists

Display all of the Layer 2 ACLs configured in the system, whether or not they are applied to an interface, and the count of
matches/mismatches against each ACL entry displayed.
C-Series, E-Series, S-Series, Z-Series
Syntax show mac access-lists [access-list-name] [interface interface]
[in | out]
Parameters
access-list-name
interface
interface
in | out
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names are up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– configures a standard MAC ACL.
– configures an extended MAC ACL.
Enter the name of a configured MAC ACL, up to 140 characters.
Enter the keyword interface followed by the one of the following
keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet and then enter the slot/port
information.
• For a Port Channel interface, enter the keyword port-
channel and then enter a number. The C-Series and S-
Series range is 1 to 128. The E-Series range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet and then
enter the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet and then enter the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and then enter the slot/port information.
Identify whether ACL is applied on ingress or egress side.
Introduced on the Z9000.
285