Neighbor Send-Community - Dell Force10 S4810P Reference Manual

Parameters
ipv6-address
peer-group-name
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
The first time you enter this command it configures the neighbor as a route reflector and
Information
members of the route-reflector cluster. Internal BGP (IBGP) speakers do not need to be fully
meshed if you configure a route reflector.
When all clients of a route reflector are disabled, the neighbor is no longer a route reflector.

neighbor send-community

Send a COMMUNITY attribute to a BGP neighbor or peer group. A COMMUNITY attribute indicates that all routes with
that attribute belong to the same community grouping.
C-Series, E-Series
Syntax neighbor {ipv6-address | peer-group-name} send-community
To disable sending a COMMUNITY attribute, use the no neighbor {ipv6-address |
peer-group-name} send-community command.
Parameters
ipv6-address
peer-group-name
Defaults Not configured and COMMUNITY attributes are not sent to neighbors.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0
Version 7.4.1.0
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Enter the name of the peer group. All routers in the peer group
receive routes from a route reflector.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Enter the name of the peer group to send a COMMUNITY attribute to
all routers within the peer group.
Introduced on the E-Series ExaScale.
Introduced
515