Defaults
Not configured.
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
When you enter the redistribute ospf process-id command without any other
Information
parameters, FTOS redistributes all OSPF internal routes, external type 1 routes, and external
type 2 routes.
router bgp
Enter ROUTER BGP mode to configure and enable BGP.
E-Series
Syntax
router bgp as-number
To disable BGP, use the no router bgp as-number command.
Parameters
process-id
Defaults
Not configured.
Command Modes
CONFIGURATION
Command History
Version 8.2.1.0
Version 7.4.1.0
show capture bgp-pdu neighbor
Display BGP packet capture information for an IPv6 address on the E-Series.
C-Series, E-Series
Syntax
show capture bgp-pdu neighbor ipv6-address
Parameters
ipv6-address
Command Modes
Command History
Version 8.2.1.0
524
If you do not configure the route map, the default is deny (to drop all
routes).
Introduced on the E-Series ExaScale.
Introduced
Enter the number of the OSPFv3 process. The range is 1 to 65535.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address (X:X:X:X::X) of a BGP neighbor.
•
EXEC
•
EXEC Privilege
Introduced on the E-Series ExaScale.