E-Series
motd-banner
Enable a message of the day (MOTD) banner to appear when you log in to the system.
C-Series, E-Series, S-Series, Z-Series
Syntax
motd-banner
To disable the MOTD banner, use the no motd-banner command.
Defaults
Enabled on all lines.
Command Modes
LINE
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
ping
Test connectivity between the system and another device by sending echo requests and waiting for replies.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
ping [vrf <id>] [host | ip-address | ipv6-address] [count
{number | continuous}] [datagram-size] [timeout] [source (ip
src-ipv4-address) | interface] [tos] [df-bit (y|n)] [validate-
reply(y|n)] [outgoing-interface] [pattern pattern] [sweep-min-
size] [sweep-max-size] [sweep-interval] [ointerface (ip src-
ipv4-address) | interface]
Parameters
vrf
host
Original command
Introduced on the Z9000.
Introduced on the E-Series ExaScale
Introduced on the S-Series.
Introduced on the C-Series.
Original command
(OPTIONAL) E-Series only: Enter the VRF Instance name of the device
to which you are testing connectivity.
(OPTIONAL) Enter the host name of the devices to which you are
testing connectivity.
133