Show Inventory (S-Series And Z-Series) - Dell Force10 S4810P Reference Manual

1
1
1
1
1
1
1
1
!----------------- output truncated ---------!
Related
show interfaces
Commands
show interfaces transceiver
installed transceiver. The output also displays the transceiver's serial number.

show inventory (S-Series and Z-Series)

Display the S-Series or Z-Series switch type, components (including media), and FTOS version, including hardware
identification numbers and configured protocols.
S-Series, Z-Series
Syntax show inventory [media slot]
Parameters
media
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.4
Version 8.3.11.1
Version 7.6.1.0
Usage If there are no fiber ports in the unit, just the header under
Information there are fiber ports but no optics inserted, the output displays
accessible .
Example (S-
FTOS#show inventory
Series)
System Name
system Mode
156
5 SFP 1000BASE-SX
6 SFP 1000BASE-SX
7 SFP 1000BASE-SX
8 SFP 1000BASE-SX
9 SFP 1000BASE-SX
10 Media not present or accessible
11 Media not present or accessible
12 SFP 1000BASE-SX
– displays a specific interface configuration.
– displays the physical status and operational status of an
slot
(OPTIONAL) Enter the keyword media followed by the stack ID of the
stack member for which you want to display pluggable media
inventory.
NOTE: This parameter is available but not supported in FTOS
version 8.3.11.4. Because stacking is not supported, if you use this
parameter, the output displays "Media not present or accessible"
(refer to the
Output expanded to include Piece Part ID (PPID) and eSR4 optics.
Introduced on the Z9000.
Introduced this version of the command for S-Series. S-Series output
differs from E-Series.
: S50v
: 1.0
B320210155 Yes
B342232168 Yes
H11VJ8F Yes
AJUR367 Yes
AJLH367 Yes
P11DCP3 Yes
Usage Information section).
show inventory media displays. If
Media not present or