Show Interfaces Debounce - Dell Force10 S4810P Reference Manual

Defaults none
Command Modes EXEC
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
Example
FTOS#show interfaces dampening
Interface Supp
Gi 3/2
Gi 3/10
FTOS#
Related
dampening
Commands
show interfaces
show interfaces configured

show interfaces debounce

Display information on interfaces with the debounce timer configured.
E-Series
Syntax show interfaces debounce interface
Parameters
interface
Command Modes
Command History
Version 8.5.1.0
Version 8.2.1.0
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Up 0
Up 0
– configures dampening on an interface.
– displays information on a specific physical interface or virtual interface.
– displays any interface with a non-default configuration.
(Optional) Enter one of the following keywords and slot/port or
number information:
•
•
•
• EXEC
• EXEC Privilege
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
0 20
0 5
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
800 4500 120
750 2500 20
797