Show Command-Tree - Dell Force10 S4810P Reference Manual

default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/3]by
default from console
[11/20 15:47:23]: CMD-(CLI):[ip address 5.5.5.1 /24]by default
from console
[11/20 15:47:23]: CMD-(CLI):[no shutdown]by default from
console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/4]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/5]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 21:17:35]: CMD-(CLI):[line console 0]by default from
console
[11/20 21:17:36]: CMD-(CLI):[exec-timeout 0]by default from
console
[11/20 21:17:36]: CMD-(CLI):[exit]by default from console
[11/20 21:19:25]: CMD-(CLI):[show command-history]by default
from console
FTOS#
Related clear command history
Commands

show command-tree

Display the entire CLI command tree, and optionally, display the utilization count for each commands and its options.
C-Series, E-Series, S-Series, Z-Series
Syntax show command-tree [count | no]
Parameters
count
no
Defaults none
Command Modes
Command History
Version 8.3.11.1
146
– clears the command history log.
Display the command tree with a usage counter for each command.
Display all of the commands that may be preceded by the keyword
no, which is the keyword used to remove a command from the
running-configuration.
• EXEC
• EXEC Privilege
Introduced on the Z9000.