Feature - Mitsubishi VS-5075 Owner's Manual

* Using the Active A/V Network Feature
_Important:
This A/V Network is a special feature that makes it easier to use
your Projection TV and your other Mitsubishi A/V components
together. When you connect the A/V Network, you can point the
remote control at the Projection TV, and it will "pass" the remote
control command to the other components.
Additionally, you will gain even more benefits if you have a
Mitsubishi VCR equipped for the Active AJV Network. The Active
A/V Network allows you to perform many of the commonly used
features of your system at the press of just one button.
This section will explain the various features of the
Active A/V Network.
before you begin
• You must have connected an A/V Network cable frora the Active
A/V Network terminal of' your Projection TV to the _JV Network
IN terminal of your VCR. See "Projection TV + Mitsubishi
products that have A/V Network terminals," page 43.
• You must have connected your VCR to :Input 1 of your
Projection TV.
You must have set your Projection T_s "A/V Network" setting
to "Active" or "Basic." See "Setting the A!V Network," page 63.
Your VCR's remote control switch (if any) should be set to
'_VCR-A."
• Your VCR's video mute setting should be turned ON.
The A/V Network is only available for select Mitsubishi
components.
Using the Active A/V Network Feature 101