Mitsubishi VS-5075 Owner's Manual page 32

Projection TV + VCR + antenna or cable without
a cable box
equipment you will need
You may want to connect a VCR along with your antenna or cable
system. To complete this hook-up, you may need the following
equipment.
one 75 ohm coaxial cable,
one set of RCA pin-type audio
cables,
one RCA pin type video cable,
(if connecting a standard
VCR),
OR
one S-video cable (if connecting
a VCR with an S-video output).
_Important: For instructions on using the built-in VCR tray, see page 109.
(Model VS-5075 only).
32 Chapter 2: Connecting Your Projection TV