Mitsubishi VS-5075 Owner's Manual page 76

_Important:
Setting the timer I _
This special feature allows you to program the Projection TV to
turn on automatically at a time that you set. To set the timer:
[] MAIN MENU
_ irst Time Setup
Customize Display
Advanced Features
Use these buttons on the remote:
[]ADJUST ENTER _ MENU to
roq
to select -- to enter go back
O Press the MENU button on the
remote control. Tile Main Menu
will appear on the, screen.
O Use the ADJUST buttons to
select "Advanced :Features."
Press ENTER.
[] ADVANCED FEATURES
[] Set the Timer
[] Use Parental Lock
[] Set SuperQuickView
[] Use Advanced PIP
[] Reset Audio/Video
Use these buttons on the remote:
F_-]ADJUST [] ENTER _ MENU to
tO select to enter go back
You will see the "Advanced
Features" screen. Use the
ADJUST buttons to select
"Set the timer." Press ENTER.
[] SET THE TIMER
O Day : Sunday
_ Start : - -
time
Input : - -
IOI Channel : - - -
The TV will turn on at a day and time
you select. It will then turn off in
five minutes unless a button ls pushed.
Use these, buttons on the remote:
[_ ADJUST to select the day
[] ENTER to enter [_ MENU to go back
O Use the ADJUST buttons and
the ENTER button to set Day,
Start time, Input., and Channel.
After setting the timer, make sure
that the program timer indicator
is lit. The indicator ,Mll light in
orange when the TV is turned on
and light in red when the TV is
turned off. The indicator will not
light When using the menus, or
when a lock message is displayed.
If you press the CANCEL button
while setting the timer, the arrow
will move to the previous item. To
clear the timer, press CANCEL
with the arrow next to "Day."
When the timer turns the Projection _.[Won, the display will flash.
If you do not press any function buttons for about 5 rainutes, the
Projection TV will automatically turn off. Press a function button
(such as the display button) to keep the Projection TV on and turn
off the flashing display.
Using the Advanced Features 77