Mitsubishi VS-5075 Owner's Manual page 57

Memorizing channels
You can use the menus to automatically memorize the channels
your Projection TV can receive. Once channels are memorized, yo_
can scan through them using the channel controls on the remote
control and control panel.
[] MAIN MENU
_ First Time Setup [
Customize Display
Advanced Features
Use these buttons on the remote:
ADJUST ENTER _MENUto
to select _ to enter go back
I_ Press the N:ENU button on th,
remote control. The Main Men
will appear on the screen.
_| Use the ADJUST buttons to
select "First Time Setup." Pre,_
ENTER.
[] FIRST TIME SETUP I
_ Memorize Channels
I
Set the Clock
_- Add/Delete Channel
Set A/V Network
Align Colors
Use these buttons on the remote:
[] ADJUST [] ENTER _ MENU to
to select to enter go back
I
_| You will see the "First Time
Setup" screen. Use the ADJU5
buttons to select "Memorize
Channels." Press ENTER.
[] MEMORIZE CHANNELS I
O Antenna A (Ant-A)
[] Antenna B (Ant-B) /
YourTV_as two , ,
antenna InLquts cahee
Antenna A (Ant-Al and
Antenna S (Ant-B).
Or_ which input would you like to
memorize channels?
IJse these buttons on the remote:
[_] ADJUST [] ENTER _ MENU to
to select to enter go Llack
(1| Use the AD,JUST buttons to
select the terminal (Ant-A or
Ant-B) to which you attached
an antenna or cable from your
cable systera. Press ENTER. (]
you made a connection to each
terminal, you should memoriz_
the channels for the one now,
and for the other later.)
58 Chapter 3: Operating Yonr Project:ion TV