Mitsubishi VS-5075 Owner's Manual page 42

Projection TV + subwoofer
_>Important:
If you have an audio system and a subwoofer, you can use the
Projection TV's SUBWOOFER OUT terminal to direct the
appropriate sounds from your TV to the subwoofer.
equipment you will need
• two RCA pin-type audio cables.
procedure
O Connect an RCA audio cable to the SUBWOOFER OUT
terminal on the back of the ProjecrJon TV.
O Connect the other end of this cable to the AUX IN terminal on
the back of an audio system
Connect the second audio cable between the AID[ OUT
terminal on the audio system and the subwoofer.
O Set the audio system input selector to the AUX position.
Adjust the volume of the sound of t!ae Projection TV through
the audio system.
If you are using a powered subwoofer, you can connect the
Projection TV directly to the subwoofer.
Audio System Rear Terminals
AUX
O
Projection TV Rear TermLnals
VIDEO
......
N I Q_,._
S-VI_EO [
T
O
You should make this connection in addition to one of the other
connections in this chapter, not in_;tead of other connections.
42 Chapter 2: Connecting Your Projection TV