Mitsubishi VS-5075 Owner's Manual page 65

Selecting the menu type
Select Menu Type
First Time Setup
Customize Display
Advanced Features
• Set the Timer
• Use Parental Lock
• Set SuperQuickView
• Use Advanced PIP
• Reset Audio/Video
E
You can display the on-.screen menus in one of two ways. The
"Standard Menu," which is illustrated in this manual, provides
step-by-step instructions for all features. The "Advanced Menu" let
you select each feature directly by its name and icon.
Your TV's normal setting is the "Standard Menu," To switch
between the Standard and Advanced menus:
CUSTOMIZE DISPLAY
Select Menu Type
[] Rename the Input
[] Name the Channels
[] Lock A/V Functions
Use these buttons on the remote:
ADJUST ENTER _ MENU to
to select -- to enter go back
[] SELECT MENU TYPE
[] Advanced Menu
The Standard Menu lets you select
features in a step-by-step method,
and contains full descriptions o{
the features. The TV's picture will
be reduced in size.
Use these buttons ,3n the remote:
J_ADJUST ENTER L_ MENU ta
ta select [] to enter go back
]
O Press the MENU button on th_
remote control. The Main Men
will appear on the screen.
Use the t__DJUST buttons to
select "Customize Display."
Press ENTER.
O
You will see the "Customize
Display" menu. Use the AD-
JUST b_Lttons to select "Selec
Menu Type." Press ENTER.
O Use the ADJUST buttons to
select "Standard Menu" or
"Advanced Menu."
Press tl_e ENTER or MENU
button.
If you select the "Standard Menu," the screen will return to the
"Customize Display" menu. If you selected the "Advanced Menu
the screen will show the Advanced Main Menu (shown below.)
To use the Advanced Menu, use the ADJUST buttons to highlig
the icon of the feature you want to use, then press ENTER. The
name of the highlighted ico:a appears at the bottom of the screeI
This menu disappears if you do not select an item within 1 mira
The Advanced Menu
-[]
[]
[]
[]
[]
[]
[]
Select Menu Tcpe
-The feature name of the highli
icon appears here.
66 Chapter 3: Operating Your Projection TV