Using The Vcr Tray - Mitsubishi VS-5075 Owner's Manual

Using the VCR tray (VS-5075, VS-5077 only)
Important:
Your Mitsubishi Projection TV has a built-in VCR tray on tile top
rear of the cabinet that provides you with a convenient place to
store your VCR.
To use the tray:
O Lift the VCR tray into position.
Place your VCR on top of the
tray.
O
Thread the VCR belt (included
with your Projection TV)
through the holes in the legs of
the VCR tray.
Wrap the belt around the VCR
and join the belt at tlhe buckle.
0 Tighten the strap so it holds the
VCR in place.
Any time you put a VCR on the tray, alw.'_ys fix it to the tray with
the belt.
• Do not place a VCR weighing more than 35 pounds o:a the tray.
• Do not place more than one VCR on tile tray.
• Take the VCR off the tray before moving the Projection TV.
.//111/// >'/.I//.
To keep your Projection TV from
toppling in the event of an
earthquake, run rope or cord
through the clamp on the back of
the Projection TV, then attach the
rope to a wall.
Troubleshooting 109